On-Demand Training - Simcenter
Description
Supports the learning of Simcenter products to optimize design and predict performance in product development. The content will prepare engineers with the skills required to use the software tools for system simulation, 3D CAE, CFD modeling and testing for structural analyses to fluid simulation to electric motor design. The software products training that is included but not limited to are Simcenter STAR-CCM+, Simcenter 3D, Simcenter SPEED and Simcenter Amesim.
- 12 month subscription
- Access to cloud-based environment for hands-on lab exercises
- Access to new training content added during the subscription period
- Knowledge assessments to measure learning progress
Explore This On-Demand Training
All
CAD Embedded CFD
Design Space Exploration using HEEDS
CFD analysis: Fundamentals of Simcenter STAR-CCM+
CFD analysis: Multiphase flows in Simcenter STAR-CCM+
CFD analysis: Geometry preparation using Simcenter STAR-CCM+
CFD Analysis: Advanced topics in Simcenter STAR-CCM+
Simcenter 3D Pre/Post
System modeling using Simcenter
Electric motor design using Simcenter SPEED
Simcenter 3D Acoustics
Simcenter 3D FE Model Correlation and Update
Simcenter 3D Motion
Testing Solutions using Simcenter Testlab
Load data processing with Simcenter Tecware
Simcenter 3D Thermal Multiphysics
Simcenter Multimech
NX Basic Design
Simcenter MotorSolve
Battery design and simulation using Simcenter products
Electromagnetics in Simcenter STAR-CCM+
Simcenter 3D Space Systems Thermal
Simcenter 3D Rotor Dynamics
Simcenter Nastran Multistep Nonlinear (SOL 401/402) with Simcenter 3D
CFD Analysis: Fundamentals of Simcenter SPH Flow
Electronics Cooling Simulation and Testing
CFD analysis: Turbomachinery using Simcenter STAR-CCM+
1-D CFD
Chapters
learning path
- FloEFD for Solid Edge Learning Path Overview
- Introduction to FloEFD
- FloEFD Project Creation
- Boundary Conditions and Goals
- Solving and Post Processing
- FloEFD Meshing
- Parametric Study
- FloEFD Advanced Meshing
FloEFD for Solid Edge
This course will provide new users of FloEFD for Solid Edge with a background sufficient for tackling a wide range of flow and thermal analysis problems.
Introduction to CFD
FloEFD for Solid Edge 8 Chapters
This course will provide new users of FloEFD for Solid Edge with a background sufficient for tackling a wide range of flow and thermal analysis problems.
1 FloEFD for Solid Edge Learning Path Overview 1 Topic
- Learning Path Overview
2 Introduction to FloEFD 8 Topics
- Introduction to CFD
- The Numerical Basis of FloEFD
- Introduction to FloEFD Meshing Technology
- Knowledge Check 1: Introduction to FloEFD
- FloEFD Capabilities Part 1
- FloEFD Capabilities Part 2
- What Does FloEFD Do?
- Knowledge Check 2: Introduction to FloEFD
3 FloEFD Project Creation 6 Topics
- Getting started with FloEFD
- FloEFD Project Creation
- FloEFD Computational Domain and File Structure
- Knowledge Check 1: FloEFD Project Creation
- Lab: FloEFD Project Creation
- Assessment: FloEFD Project Creation
4 Boundary Conditions and Goals 7 Topics
- Boundary Conditions in FloEFD
- Introduction to Goals In FloEFD
- Knowledge Check 1: Boundary Conditions and Goals
- Goals Setup In FloEFD
- Basic Automatic Meshing in FloEFD
- Knowledge Check 2: Boundary Conditions and Goals
- Lab: Boundary Conditions and Goals Setup
5 Solving and Post Processing 8 Topics
- Solving and Monitoring
- Post Processing: Cut Plots and Surface Plots
- Knowledge Check 1: Solving and Post Processing
- Post Processing: Isosurface Plots and Flow Trajectories
- Post Processing: Numerical Results
- Knowledge Check 2: Solving and Post Processing
- Lab: Solving and Monitoring
- Assessment: Solving and Post Processing
6 FloEFD Meshing 10 Topics
- Introduction to FloEFD Meshing
- Manual Global Mesh Settings
- Global Mesh Refinement Settings
- Knowledge Check 1: FloEFD Meshing
- Additional Global Mesh Refinement Settings
- Local Mesh Settings
- Knowledge Check 2: FloEFD Meshing
- Lab: Conjugate Heat Transfer
- Lab: Mesh Optimization
- Assessment: FloEFD Meshing
7 Parametric Study 4 Topics
- Introduction to Parametric Studies
- Parametric Study Creation
- DOE and Optimization in FloEFD
- Knowledge Check 1: Parametric Study
8 FloEFD Advanced Meshing 5 Topics
- Advanced Refinement Settings
- Control Planes
- Solution Adaptive Meshing
- Knowledge Check 1: FloEFD Advanced Meshing
- Assessment: FloEFD Advanced Meshing
Chapters
learning path
- Learning Experience Overview - Product Design
- Introduction to FloEFD for NX
- FloEFD for NX Project Creation
- Boundary Conditions and Goals in FloEFD for NX
- Solving and Post Processing in FloEFD for NX
- FloEFD for NX Meshing
- FloEFD for NX Parametric Study
- FloEFD for NX Advanced Meshing
FloEFD for NX
This course will provide new users of FloEFD for NX with a background sufficient for tackling a wide range of flow and thermal analysis problems.
Introduction to CFD
FloEFD for NX 8 Chapters
This course will provide new users of FloEFD for NX with a background sufficient for tackling a wide range of flow and thermal analysis problems.
1 Learning Experience Overview - Product Design 2 Topics
- Welcome: Navigation Overview
- Product Design track Intro
2 Introduction to FloEFD for NX 9 Topics
- Introduction to CFD
- The Numerical Basis of FloEFD
- Introduction to FloEFD Meshing Technology
- Knowledge Check 1: Introduction to FloEFD
- FloEFD Capabilities Part 1
- FloEFD Capabilities Part 2
- What Does FloEFD Do?
- Knowledge Check 2: Create Project
- Assessment: Introduction to FloEFD
3 FloEFD for NX Project Creation 6 Topics
- Getting Started with FloEFD
- FloEFD Project Creation
- FloEFD Computational Domain and File Structure
- Knowledge Check: FloEFD Project Creation
- Lab: FloEFD Project Creation
- Assessment: FloEFD Project Creation
4 Boundary Conditions and Goals in FloEFD for NX 8 Topics
- Boundary Conditions in FloEFD
- Introduction to Goals in FloEFD
- Knowledge Check 1: Boundary Conditions and Goals
- Goals Setup in FloEFD
- Basic Automatic Meshing in FloEFD
- Knowledge Check 2: Boundary Conditions and Goals
- Lab: Boundary Conditions and Goals Setup
- Assessment: Boundary Conditions and Goals
5 Solving and Post Processing in FloEFD for NX 8 Topics
- Solving and Monitoring
- Post Processing: Cut Plots and Surface Plots
- Knowledge Check 1: Solving and Post Processing
- Post Processing: Isosurface Plots and Flow Trajectories
- Post Processing: Numerical Results
- Knowledge Check 2: Solving and Post Processing
- Lab: Solving and Post Processing
- Assessment: Solving and Post Processing
6 FloEFD for NX Meshing 9 Topics
- Introduction to FloEFD Meshing
- Manual Global Mesh Settings
- Global Mesh Refinement Settings
- Knowledge Check 1: FloEFD Meshing
- Additional Global Mesh Refinement Settings
- Local Mesh Settings
- Knowledge Check 2: FloEFD Meshing
- Lab: Conjugate Heat Transfer
- Assessment: Meshing
7 FloEFD for NX Parametric Study 5 Topics
- Introduction to Parametric Studies
- Parametric Study Creation
- DOE and Optimization in FloEFD
- Knowledge Check 1: FloEFD for NX Parametric Study
- Assessment: FloEFD for NX Parametric Study
8 FloEFD for NX Advanced Meshing 5 Topics
- Advanced Refinement Settings
- Control Planes
- Solution Adaptive Meshing
- Knowledge Check 1: FloEFD Advanced Meshing
- Assessment: FloEFD Advanced Meshing
Chapters
learning path
- Introduction to FLOEFD for Creo - 2022.1
- FLOEFD for Creo Project Creation - 2022.1
- Boundary Conditions and Goals in FLOEFD for Creo - 2022.1
- Solving and Post Processing in FLOEFD for Creo - 2022.1
- FLOEFD for Creo Meshing - 2022.1
- FLOEFD for Creo Parametric Study - 2022.1
- FLOEFD for Creo Advanced Meshing - 2022.1
- Assessment: FLOEFD for Creo - 2022.1
FLOEFD for Creo - 2022.1
This course will provide new users of FloEFD for Creo with a background sufficient for tackling a wide range of flow and thermal analysis problems.
FLOEFD for Creo - 2022.1 8 Chapters
This course will provide new users of FloEFD for Creo with a background sufficient for tackling a wide range of flow and thermal analysis problems.
1 Introduction to FLOEFD for Creo - 2022.1 8 Topics
- Introduction to CFD
- The Numerical Basis of FLOEFD
- Introduction to FLOEFD Meshing Technology
- KC 1: Introduction to FLOEFD
- FLOEFD Capabilities Part 1
- FLOEFD Capabilities Part 2
- What Does FLOEFD Do ?
- KC 2: Introduction to FLOEFD
2 FLOEFD for Creo Project Creation - 2022.1 5 Topics
- Getting Started With FLOEFD
- FLOEFD Project Creation
- FLOEFD Computational Domain and File Structure
- KC 1: FLOEFD Project Creation
- Lab: FLOEFD Project Creation
3 Boundary Conditions and Goals in FLOEFD for Creo - 2022.1 7 Topics
- Boundary Conditions in FLOEFD
- Introduction to Goals in FLOEFD
- KC 1: Boundary Conditions and Goals
- Goals Setup in FLOEFD
- Basic Automatic Meshing in FLOEFD
- KC 2: Boundary Conditions and Goals
- Lab: Boundary Conditions and Goals Setup
4 Solving and Post Processing in FLOEFD for Creo - 2022.1 7 Topics
- Solving and Monitoring
- Post Processing: Cut Plots and Surface Plots
- KC 1: Solving and Post Processing
- Post Processing: Isosurface Plots and Flow Trajectories
- Post Processing: Numerical Results
- KC 2: Solving and Post Processing
- Lab: Solving and Monitoring
5 FLOEFD for Creo Meshing - 2022.1 9 Topics
- Introduction to FLOEFD Meshing
- Manual Global Mesh Settings
- Global Mesh Refinement Settings
- KC 1: FLOEFD Meshing
- Additional Global Mesh Refinement Settings
- Local Mesh Settings
- KC 2: FLOEFD Meshing
- Lab: Conjugate Heat Transfer
- Lab: Mesh Optimization
6 FLOEFD for Creo Parametric Study - 2022.1 4 Topics
- Introduction to Parametric Studies
- Parametric Study Creation
- DOE and Optimization in FLOEFD
- KC 1: FLOEFD Parametric Study
7 FLOEFD for Creo Advanced Meshing - 2022.1 4 Topics
- Advanced Refinement Settings
- Control Planes
- Solution Adaptive Meshing
- KC 1: FLOEFD Advanced Meshing
8 Assessment: FLOEFD for Creo - 2022.1 1 Topic
- Assessment: FLOEFD for Creo
Chapters
learning path
- Introduction to FLOEFD for CATIA - 2022.1
- FLOEFD for CATIA Project Creation - 2022.1
- Boundary Conditions and Goals in FLOEFD for CATIA - 2022.1
- Solving and Post Processing in FLOEFD for CATIA - 2022.1
- FLOEFD for CATIA Meshing - 2022.1
- Parametric Study in FLOEFD for CATIA - 2022.1
- FLOEFD for CATIA Advanced Meshing - 2022.1
- Assessment: FLOEFD for CATIA - 2022.1
FLOEFD for CATIA - 2022.1
This course will provide new users of FloEFD for CATIA with a background sufficient for tackling a wide range of flow and thermal analysis problems.
Introduction to CFD
FLOEFD for CATIA - 2022.1 8 Chapters
This course will provide new users of FloEFD for CATIA with a background sufficient for tackling a wide range of flow and thermal analysis problems.
1 Introduction to FLOEFD for CATIA - 2022.1 8 Topics
- Introduction to CFD
- The Numerical Basis of FLOEFD
- Introduction to FLOEFD Meshing Technology
- KC 1: Introduction to FLOEFD
- FLOEFD Capabilities Part 1
- FLOEFD Capabilities Part 2
- What Does FLOEFD Do?
- KC 2: Introduction to FLOEFD
2 FLOEFD for CATIA Project Creation - 2022.1 5 Topics
- Getting Started With FLOEFD
- FLOEFD Project Creation
- FLOEFD Computational Domain and File Structure
- KC 1: FLOEFD Project Creation
- Lab: FLOEFD Project Creation
3 Boundary Conditions and Goals in FLOEFD for CATIA - 2022.1 7 Topics
- Boundary Conditions in FLOEFD
- Introduction to Goals in FLOEFD
- KC 1: Boundary Conditions and Goals
- Goals Setup in FLOEFD
- Basic Automatic Meshing in FLOEFD
- KC 2: Boundary Conditions and Goals
- Lab: Boundary Conditions and Goals Setup
4 Solving and Post Processing in FLOEFD for CATIA - 2022.1 7 Topics
- Solving and Monitoring
- Post Processing: Cut Plots and Surface Plots
- KC 1: Solving and Post Processing
- Post Processing: Isosurface Plots and Flow Trajectories
- Post Processing: Numerical Results
- KC 2: Solving and Post Processing
- Lab: Solving and Post Processing
5 FLOEFD for CATIA Meshing - 2022.1 9 Topics
- Introduction to FLOEFD Meshing
- Manual Global Mesh Settings
- Global Mesh Refinement Settings
- KC 1: FLOEFD Meshing
- Additional Global Mesh Refinement Settings
- Local Mesh Settings
- KC 2: FLOEFD Meshing
- Lab: Conjugate Heat Transfer
- Lab: Mesh Optimization
6 Parametric Study in FLOEFD for CATIA - 2022.1 4 Topics
- Introduction to Parametric Studies
- Parametric Study Creation
- DOE and Optimization in FLOEFD
- KC 1: FLOEFD Parametric Study
7 FLOEFD for CATIA Advanced Meshing - 2022.1 4 Topics
- Advanced Refinement Settings
- Control Planes
- Solution Adaptive Meshing
- KC 1: FLOEFD Advanced Meshing
8 Assessment: FLOEFD for CATIA - 2022.1 1 Topic
- Assessment: FLOEFD for CATIA
Chapters
learning path
- Introduction to FloEFD Standalone
- FloEFD Standalone Project Creation
- Boundary Conditions and Goals in FloEFD Standalone
- Solving & Post Processing in FloEFD Standalone
- FloEFD Standalone Meshing
- FloEFD Standalone Parametric Study
- FloEFD Standalone Advanced Meshing
FloEFD Standalone
This course will provide new users of FloEFD Standalone with a background sufficient for tackling a wide range of flow and thermal analysis problems.
Introduction to CFD
FloEFD Standalone 7 Chapters
This course will provide new users of FloEFD Standalone with a background sufficient for tackling a wide range of flow and thermal analysis problems.
1 Introduction to FloEFD Standalone 9 Topics
- Introduction to CFD
- The Numerical Basis of FloEFD
- Introduction to FloEFD Meshing Technology
- Knowledge Check 1: Introduction to FloEFD
- FloEFD Capabilities Part 1
- FloEFD Capabilities Part 2
- What Does FloEFD Do?
- Knowledge Check 2: Introduction to FloEFD
- Assessment: Introduction to FloEFD
2 FloEFD Standalone Project Creation 5 Topics
- Getting started with FloEFD
- FloEFD Project Creation
- FloEFD Computational Domain and File Structure
- Lab: FloEFD Project Creation
- Assessment: FloEFD Project Creation
3 Boundary Conditions and Goals in FloEFD Standalone 8 Topics
- Boundary Conditions in FloEFD
- Introduction to Goals In FloEFD
- Knowledge Check 1: Boundary Conditions and Goals
- Goals Setup in FloEFD
- Basic Automatic Meshing in FloEFD
- Knowledge Check 2: Boundary Conditions and Goals
- Lab: Boundary Conditions and Goals Setup
- Assessment: Boundary Conditions and Goals
4 Solving & Post Processing in FloEFD Standalone 8 Topics
- Solving & Monitoring
- Post Processing: Cut Plots, & Surface Plots
- Knowledge Check 1: Solving & Post Processing
- Post Processing: Isosurface plots, & Flow Trajectories
- Post Processing: Numerical Results
- Knowledge Check 2: Solving & Post Processing
- Lab: Solving & Monitoring
- Assessment: Solving & Post Processing
5 FloEFD Standalone Meshing 10 Topics
- Introduction to FloEFD Meshing
- Manual Global Mesh Settings
- Solution Adaptive Meshing
- Global Mesh Refinement Settings
- Knowledge Check 1: FloEFD Meshing
- Additional Global Mesh Refinement Settings
- Local Mesh Settings
- Knowledge Check 2: FloEFD Meshing
- Lab: Conjugate Heat Transfer
- Assessment: FloEFD Meshing
6 FloEFD Standalone Parametric Study 4 Topics
- Introduction to Parametric Studies
- Parametric study creation
- DOE & Optimization in FloEFD
- Assessment: Parametric Study
7 FloEFD Standalone Advanced Meshing 5 Topics
- Advanced Refinement Settings
- Control Planes
- Solution Adaptive Meshing
- Lab: Mesh Optimization
- Assessment: FloEFD Advanced Meshing
Chapters
learning path
- Thermal Management and PCB Modeling in FLOEFD
- Using EDA Data
- Component Modeling in FLOEFD
- Meshing Advices and Thermal Radiation in FLOEFD
- Advanced Post Processing in FLOEFD
- Cooling Electronic Systems in FLOEFD
- Calibration in FLOEFD
- Assessment: FLOEFD Thermal Management of Electronic Systems
FLOEFD Thermal Management of Electronic Systems
The course provides a detailed description of Simcenter FLOEFD™ capabilities in the specific usage of electronics cooling and thermal management.
FLOEFD Thermal Management of Electronic Systems 8 Chapters
The course provides a detailed description of Simcenter FLOEFD™ capabilities in the specific usage of electronics cooling and thermal management.
1 Thermal Management and PCB Modeling in FLOEFD 5 Topics
- Thermal Management in FLOEFD
- PCB Modeling Levels in FLOEFD
- PCB Compact Modeling Level
- KC 1: Thermal Management and PCB Modeling in FLOEFD
- Lab Exercise 1: PCB Modeling Using Printed Circuit Board and Volume Heat Sources
2 Using EDA Data 5 Topics
- FLOEDA Bridge User Interface and Importing EDA Data
- FLOEDA Bridge Capabilities
- EDA Data Transfer to FLOEFD
- KC 1: Using EDA Data
- Lab Exercise 2: Modeling Using Smart PCB and Volume Heat Sources
3 Component Modeling in FLOEFD 7 Topics
- Introduction to Thermal Component Models
- Component Modeling Levels
- KC 1: Component Modeling in FLOEFD
- FLOEFD Package Creator
- Generating and Importing TCMs
- KC 2: Component Modeling in FLOEFD
- Lab Exercise 3: Modeling of ICs Using 2R and Detailed Modeling
4 Meshing Advices and Thermal Radiation in FLOEFD 3 Topics
- Meshing Advice
- Thermal Radiation
- KC 1: Meshing Advice and Thermal Radiation
5 Advanced Post Processing in FLOEFD 3 Topics
- Post Processing Creating Plane Plots, Surface Plots and Flow Trajectories
- Post Processing Shortcut and Bottleneck Numbers Equation Goals and Flux Report
- KC 1: FLOEFD Post Processing
6 Cooling Electronic Systems in FLOEFD 5 Topics
- Cooling Electronic Systems Using Heat Pipes
- Cooling Electronic Systems Using Axial Fans
- Cooling Electronic Systems Cold Plates and Joule Heating Effects
- KC 1: Cooling Electronic Systems in FLOEFD
- Lab Exercise 4: Thermal Management Using Axial Fans and Heat Pipes
7 Calibration in FLOEFD 3 Topics
- Calibration in FLOEFD
- KC 1: Calibration in FLOEFD
- Lab Exercise 5: Calibration
8 Assessment: FLOEFD Thermal Management of Electronic Systems 1 Topic
- Assessment: FLOEFD Thermal Management of Electronic Systems
Chapters
learning path
- Assessment: FLOEFD Thermal Management of Optical Systems
FLOEFD Thermal Management of Optical Systems
The FLOEFD Thermal Management of Optical Systems course will cover the cross-effects between thermal, electrical and optical behaviors of lighting systems.
FLOEFD Thermal Management of Optical Systems 5 Chapters
The FLOEFD Thermal Management of Optical Systems course will cover the cross-effects between thermal, electrical and optical behaviors of lighting systems.
5 Assessment: FLOEFD Thermal Management of Optical Systems 1 Topic
- Assessment: FLOEFD Thermal Management of Optical Systems
Chapters
learning path
- Introduction to FloEFD for Creo
- FloEFD for Creo Project Creation
- Boundary Conditions and Goals in FloEFD for Creo
- Solving & Post Processing in FloEFD for Creo
- FloEFD for Creo Meshing
- FloEFD for Creo Parametric Study
- FloEFD for Creo Advanced Meshing
FloEFD for Creo
This course will provide new users of FloEFD for Creo with a background sufficient for tackling a wide range of flow and thermal analysis problems.
Introduction to CFD
FloEFD for Creo 7 Chapters
This course will provide new users of FloEFD for Creo with a background sufficient for tackling a wide range of flow and thermal analysis problems.
1 Introduction to FloEFD for Creo 9 Topics
- Introduction to CFD
- The Numerical Basis of FloEFD
- Introduction to FloEFD Meshing Technology
- Knowledge Check 1: Introduction to FloEFD
- FloEFD Capabilities Part 1
- FloEFD Capabilities Part 2
- What Does FloEFD Do?
- Knowledge Check 2: Introduction to FloEFD
- Assessment: Introduction to FloEFD
2 FloEFD for Creo Project Creation 6 Topics
- Getting started with FloEFD
- FloEFD Project Creation
- FloEFD Computational Domain and File Structure
- Knowledge Check 1: FloEFD Project Creation
- Lab: FloEFD Project Creation
- Assessment: FloEFD Project Creation
3 Boundary Conditions and Goals in FloEFD for Creo 8 Topics
- Boundary Conditions in FloEFD
- Introduction to Goals In FloEFD
- Knowledge Check 1: Boundary Conditions and Goals
- Goals Setup in FloEFD
- Basic Automatic Meshing in FloEFD
- Knowledge Check 2: Boundary Conditions and Goals
- Lab: Boundary Conditions and Goals Setup
- Assessment: Boundary Conditions and Goals
4 Solving & Post Processing in FloEFD for Creo 8 Topics
- Solving & Monitoring
- Post Processing: Cut Plots, & Surface Plots
- Knowledge Check 1: Solving & Post Processing
- Post Processing: Isosurface plots, & Flow Trajectories
- Post Processing: Numerical Results
- Knowledge Check 2: Solving & Post Processing
- Lab: Solving & Monitoring
- Assessment: Solving & Post Processing
5 FloEFD for Creo Meshing 9 Topics
- Introduction to FloEFD Meshing
- Manual Global Mesh Settings
- Global Mesh Refinement Settings
- Knowledge Check 1: FloEFD Meshing
- Additional Global Mesh Refinement Settings
- Local Mesh Settings
- Knowledge Check 2: FloEFD Meshing
- Lab: Conjugate Heat Transfer
- Assessment: FloEFD Meshing
6 FloEFD for Creo Parametric Study 4 Topics
- Introduction to Parametric Studies
- Parametric Study Creation
- DOE & Optimization in FloEFD
- Assessment: Parametric Study
7 FloEFD for Creo Advanced Meshing 5 Topics
- Advanced Refinement Settings
- Control Planes
- Solution Adaptive Meshing
- Lab: Mesh Optimization
- Assessment: FloEFD Advanced Meshing
Chapters
learning path
- Introduction to FLOEFD for CATIA - 2020.2
- FLOEFD for CATIA Project Creation - 2020.2
- Boundary Conditions and Goals in FLOEFD for CATIA - 2020.2
- Solving and Post Processing in FLOEFD for CATIA - 2020.2
- FLOEFD for CATIA Meshing - 2020.2
- Parametric Study in FLOEFD for CATIA - 2020.2
- FLOEFD for CATIA Advanced Meshing - 2020.2
- Assessment: FLOEFD for CATIA - 2020.2
FLOEFD for CATIA - 2020.2
This course will provide new users of FloEFD for CATIA with a background sufficient for tackling a wide range of flow and thermal analysis problems.
Introduction to CFD
FLOEFD for CATIA - 2020.2 8 Chapters
This course will provide new users of FloEFD for CATIA with a background sufficient for tackling a wide range of flow and thermal analysis problems.
1 Introduction to FLOEFD for CATIA - 2020.2 8 Topics
- Introduction to CFD
- The Numerical Basis of FLOEFD
- Introduction to FLOEFD Meshing Technology
- KC 1: Introduction to FLOEFD
- FLOEFD Capabilities Part 1
- FLOEFD Capabilities Part 2
- What Does FLOEFD Do?
- KC 2: Introduction to FLOEFD
2 FLOEFD for CATIA Project Creation - 2020.2 5 Topics
- Getting Started With FLOEFD
- FLOEFD Project Creation
- FLOEFD Computational Domain and File Structure
- KC 1: FLOEFD Project Creation
- Lab: FLOEFD Project Creation
3 Boundary Conditions and Goals in FLOEFD for CATIA - 2020.2 7 Topics
- Boundary Conditions in FLOEFD
- Introduction to Goals in FLOEFD
- KC 1: Boundary Conditions and Goals
- Goals Setup in FLOEFD
- Basic Automatic Meshing in FLOEFD
- KC 2: Boundary Conditions and Goals
- Lab: Boundary Conditions and Goals Setup
4 Solving and Post Processing in FLOEFD for CATIA - 2020.2 7 Topics
- Solving and Monitoring
- Post Processing: Cut Plots and Surface Plots
- KC 1: Solving and Post Processing
- Post Processing: Isosurface Plots and Flow Trajectories
- Post Processing: Numerical Results
- KC 2: Solving and Post Processing
- Lab: Solving and Post Processing
5 FLOEFD for CATIA Meshing - 2020.2 9 Topics
- Introduction to FLOEFD Meshing
- Manual Global Mesh Settings
- Global Mesh Refinement Settings
- KC 1: FLOEFD Meshing
- Additional Global Mesh Refinement Settings
- Local Mesh Settings
- KC 2: FLOEFD Meshing
- Lab: Conjugate Heat Transfer
- Lab: Mesh Optimization
6 Parametric Study in FLOEFD for CATIA - 2020.2 4 Topics
- Introduction to Parametric Studies
- Parametric Study Creation
- DOE and Optimization in FLOEFD
- KC 1: FLOEFD Parametric Study
7 FLOEFD for CATIA Advanced Meshing - 2020.2 4 Topics
- Advanced Refinement Settings
- Control Planes
- Solution Adaptive Meshing
- KC 1: FLOEFD Advanced Meshing
8 Assessment: FLOEFD for CATIA - 2020.2 1 Topic
- Assessment: FLOEFD for CATIA
On-Demand Training - Simcenter
Receive unlimited access to all new content added during your active subscription.
During your subscription period, you will automatically receive access to all new content added to the library, including training on new product releases and technology updates to maximize your proficiency.
On-Demand Training - Simcenter
- 12 month subscription
- Access to cloud-based environment for hands-on lab exercises
- Access to new training content added during the subscription period
- Knowledge assessments to measure learning progress
Starting at
USD $2310.00 / year
USD $2310.00 / year