On-Demand Training - Simcenter
Description
Supports the learning of Simcenter products to optimize design and predict performance in product development. The content will prepare engineers with the skills required to use the software tools for system simulation, 3D CAE, CFD modeling and testing for structural analyses to fluid simulation to electric motor design. The software products training that is included but not limited to are Simcenter STAR-CCM+, Simcenter 3D, Simcenter SPEED and Simcenter Amesim.
- 12 month subscription
- Access to cloud-based environment for hands-on lab exercises
- Access to new training content added during the subscription period
- Knowledge assessments to measure learning progress
Explore This On-Demand Training
All
CAD Embedded CFD
Design Space Exploration using HEEDS
CFD analysis: Fundamentals of Simcenter STAR-CCM+
CFD analysis: Multiphase flows in Simcenter STAR-CCM+
CFD analysis: Geometry preparation using Simcenter STAR-CCM+
CFD Analysis: Advanced topics in Simcenter STAR-CCM+
Simcenter 3D Pre/Post
System modeling using Simcenter
Electric motor design using Simcenter SPEED
Simcenter 3D Acoustics
Simcenter 3D FE Model Correlation and Update
Simcenter 3D Motion
Simcenter Testlab Neo
Load data processing with Simcenter Tecware
Simcenter 3D Thermal Multiphysics
Simcenter Multimech
NX Basic Design
Simcenter MotorSolve
Battery design and simulation using Simcenter products
Electromagnetics in Simcenter STAR-CCM+
Simcenter 3D Space Systems Thermal
Simcenter 3D Rotor Dynamics
Simcenter Nastran Multistep Nonlinear (SOL 401/402) with Simcenter 3D
CFD Analysis: Fundamentals of Simcenter SPH Flow
Electronics Cooling Simulation and Testing
CFD analysis: Turbomachinery using Simcenter STAR-CCM+
1-D CFD
Simcenter Testlab
Simcenter Tecware
Chapters
learning path
- Learning Experience Overview
- NX User Interface - 2206
- Create a basic part - 2206
- Organize and display part models - 2206
- Create cylindrical parts using sketches - 2206
- Add Finishing Details - 2206
- Simple changes and part interrogation - 2206
- Basic part edits using synchronous - 2206
- Analyze existing assemblies - 2206
- Bottom-up assembly building - 2206
- Create a basic part drawing - 2206
- Using legacy sketch with NX 2206
- Assessment: NX Basic Design - 2206
NX Basic Design - 2206
In this learning path, you will explore methods for developing and editing basic solid models, assembly models, and drawings.
Welcome: Navigation Overview
NX Basic Design - 2206 13 Chapters
In this learning path, you will explore methods for developing and editing basic solid models, assembly models, and drawings.
1 Learning Experience Overview 2 Topics
- Welcome: Navigation Overview
- NX Basic Design Intro
2 NX User Interface - 2206 8 Topics
- NX User Interface
- Getting started in NX
- Getting started in NX
- Create a part and start to work in NX
- Create a part and start to work in NX
- Create new part files
- Open, save, and close existing part files
- Knowledge Check: NX User Interface
3 Create a basic part - 2206 9 Topics
- Building simple shapes using sketch
- Extruding simple shapes
- Creating a simple part
- Extruding a simple sketch section
- Creating a part using simple shapes
- Modify sketch curves
- Trim curves to create a snap ring
- Knowledge Check: Create a basic part
- Complete the input shaft model
4 Organize and display part models - 2206 7 Topics
- Visibility and display of objects
- Change the view display
- Change the view display
- Selection and organizing of objects
- Create a Feature Group
- Organize the cap model
- Knowledge Check: Organize and display part models
5 Create cylindrical parts using sketches - 2206 19 Topics
- Create cylindrical parts using sketches
- Define a sketch profile
- Define a sketch profile
- Create sketch relations
- Add geometric relations to a profile
- Add geometric relations to a profile
- Create sketch dimensions
- Add dimensions to a profile
- Add dimensions to a profile
- Create sketch half diameter dimensions
- Edit sketch relations
- Sketch a bolt circle
- Revolve a sketch profile
- Using datums to define the angle of a boss
- Revolve a sketch profile
- Create datums for a sketch
- Use datums to define the angle of a boss
- Revolve and extrude using booleans
- Knowledge Check: Create cylindrical parts using sketches
6 Add Finishing Details - 2206 10 Topics
- Add Finishing details
- Add Finishing details
- Add holes to a coupler
- Blend and chamfer edges of the coupler
- Defining holes for a mount arm
- Create threads
- Create a custom thread for 3D printing
- Knowledge Check: Add Finishing Details
- Complete the support mounting block
- Complete the milling support bracket model
7 Simple changes and part interrogation - 2206 9 Topics
- Simple changes and part interrogation
- Using the Model History
- Reorder rename and remove features
- Reorder features of an oil pan
- Identify sketch parameters and Expressions
- Measure Model Features
- Analyze the structure of an existing part
- Knowledge Check: Simple changes and part interrogation
- Simple Changes and Part Interrogation
8 Basic part edits using synchronous - 2206 6 Topics
- Basic part edits using synchronous
- Move and Replace Face
- Move faces using three points
- Resize Blends and Chamfers
- Resize blend and chamfer faces
- Knowledge Check: Basic part edits using synchronous
9 Analyze existing assemblies - 2206 7 Topics
- Introduction to Assemblies – Part 1
- Introduction to Assemblies – Part 2
- Minimally load a large assembly
- Minimal loading of a large assembly
- Open an assembly and edit assembly components
- Work in the context of an assembly
- Knowledge Check: Analyze existing assemblies
10 Bottom-up assembly building - 2206 16 Topics
- Bottom-up assembly building
- Create an assembly using the bottom-up approach
- Create a bearing mount assembly
- Constrain an assembly
- Constrain a bearing mount assembly
- Constrain a spray pump assembly
- Assemble
- Add and constrain components using Assemble
- Part families and assemblies
- Build an assembly using part family members
- Add part family members to build a clamp
- Create a pattern of components
- Pattern shelf components
- Reference a patterned feature to pattern fasteners
- Knowledge Check: Bottom-up assembly building
- Create and constrain a new assembly
11 Create a basic part drawing - 2206 12 Topics
- Create a new drawing
- Create a new non-master drawing
- Edit the parameters of a master model
- Create a new non-master drawing
- Open and edit drawing sheets
- Create drafting views and annotations
- Add views to a drawing
- Add views to a drawing
- Add dimensions to a drawing
- Add dimensions to a drawing
- Knowledge Check: Create a basic part drawing
- Thank you for Watching NX Basic Design
12 Using legacy sketch with NX 2206 31 Topics
- Building simple shapes using sketch
- (Legacy sketch) Extruding a simple sketch section
- (Legacy sketch) Creating a part using simple shapes
- (Legacy sketch) Trim curves to create a snap ring
- Create cylindrical parts using sketch
- (Legacy sketch) Define a sketch profile
- Create sketch constraints
- (Legacy sketch) Add geometric constraints to a profile
- Create sketch dimensions
- (Legacy sketch) Add dimensional constraints to a profile
- (Legacy sketch) Constrain a sketch using reference objects
- Adding details using sketch
- (Legacy sketch) Create a circular pattern of sketch curves
- (Legacy sketch) Define symmetry within a sketch
- Analyze a design
- (Legacy sketch) Alter a sketch to complete model edits
- (Legacy sketch) Resolve parent references for a sketch
- (Legacy sketch) Modify an unparameterized model using a sketch
- (Legacy sketch) Revolve a sketch profile
- (Legacy sketch) Create datums for a sketch
- (Legacy sketch) Use datums to define the angle of a boss
- (Legacy sketch) Add holes to a coupler
- (Legacy sketch) Create user defined expressions for a model
- (Legacy sketch) Extrude with offsets
- (Legacy sketch) Create a linkage arm by sweeping geometry
- (Legacy sketch) Create a linkage using a tube
- (Legacy sketch) Pattern cooling fins using external references
- (Legacy sketch) Edit features and resolve failures
- (Legacy sketch) Create a fixture assembly using top-down
- (Legacy sketch) Model a key in context of an assembly
- (Legacy sketch) Use Assembly Cut
13 Assessment: NX Basic Design - 2206 1 Topic
- Assessment: NX Basic Design
Chapters
learning path
- Learning Experience Overview
- NX User Interface - 2007
- Create a basic part - 2007
- Organize and display part models - 2007
- Create cylindrical parts using sketches - 2007
- Add Finishing Details - 2007
- Simple changes and part interrogation - 2007
- Basic part edits using synchronous - 2007
- Analyze existing assemblies - 2007
- Bottom-up assembly building - 2007
- Create a basic part drawing - 2007
- Using legacy sketch with NX 2007
- Assessment: NX Basic Design - 2007
NX Basic Design - 2007
In this learning path, you will explore methods for developing and editing basic solid models, assembly models, and drawings.
NX Basic Design Intro
NX Basic Design - 2007 13 Chapters
In this learning path, you will explore methods for developing and editing basic solid models, assembly models, and drawings.
1 Learning Experience Overview 2 Topics
- Welcome: Navigation Overview
- NX Basic Design Intro
2 NX User Interface - 2007 8 Topics
- NX User Interface
- Getting started in NX
- Getting started in NX
- Create a part and start to work in NX
- Create a part and start to work in NX
- Create new part files
- Open, save, and close existing part files
- Knowledge Check: NX User Interface
3 Create a basic part - 2007 9 Topics
- Building simple shapes using sketch
- Extruding simple shapes
- Creating a simple part
- Extruding a simple sketch section
- Creating a part using simple shapes
- Modify sketch curves
- Trim curves to create a snap ring
- Knowledge Check: Create a basic part
- Complete the input shaft model
4 Organize and display part models - 2007 7 Topics
- Visibility and display of objects
- Change the view display
- Change the view display
- Selection and organizing of objects
- Create a Feature Group
- Organize the cap model
- Knowledge Check: Organize and display part models
5 Create cylindrical parts using sketches - 2007 19 Topics
- Create cylindrical parts using sketches
- Define a sketch profile
- Define a sketch profile
- Create sketch relations
- Add geometric relations to a profile
- Add geometric relations to a profile
- Create sketch dimensions
- Add dimensions to a profile
- Add dimensions to a profile
- Create sketch half diameter dimensions
- Edit sketch relations
- Sketch a bolt circle
- Revolve a sketch profile
- Using datums to define the angle of a boss
- Revolve a sketch profile
- Create datums for a sketch
- Use datums to define the angle of a boss
- Revolve and extrude using booleans
- Knowledge Check: Create cylindrical parts using sketches
6 Add Finishing Details - 2007 10 Topics
- Add Finishing details
- Add Finishing details
- Add holes to a coupler
- Blend and chamfer edges of the coupler
- Defining holes for a mount arm
- Create threads
- Create a custom thread for 3D printing
- Knowledge Check: Add Finishing Details
- Complete the support mounting block
- Complete the milling support bracket model
7 Simple changes and part interrogation - 2007 9 Topics
- Simple changes and part interrogation
- Using the Model History
- Reorder rename and remove features
- Reorder features of an oil pan
- Identify sketch parameters and Expressions
- Measure Model Features
- Analyze the structure of an existing part
- Knowledge Check: Simple changes and part interrogation
- Simple Changes and Part Interrogation
8 Basic part edits using synchronous - 2007 6 Topics
- Basic part edits using synchronous
- Move and Replace Face
- Move faces using three points
- Resize Blends and Chamfers
- Resize blend and chamfer faces
- Knowledge Check: Basic part edits using synchronous
9 Analyze existing assemblies - 2007 7 Topics
- Introduction to Assemblies – Part 1
- Introduction to Assemblies – Part 2
- Minimally load a large assembly
- Minimal loading of a large assembly
- Open an assembly and edit assembly components
- Work in the context of an assembly
- Knowledge Check: Analyze existing assemblies
10 Bottom-up assembly building - 2007 16 Topics
- Bottom-up assembly building
- Create an assembly using the bottom-up approach
- Create a bearing mount assembly
- Constrain an assembly
- Constrain a bearing mount assembly
- Constrain a spray pump assembly
- Assemble
- Add and constrain components using Assemble
- Part families and assemblies
- Build an assembly using part family members
- Add part family members to build a clamp
- Create a pattern of components
- Pattern shelf components
- Reference a patterned feature to pattern fasteners
- Knowledge Check: Bottom-up assembly building
- Create and constrain a new assembly
11 Create a basic part drawing - 2007 12 Topics
- Create a new drawing
- Create a new non-master drawing
- Edit the parameters of a master model
- Create a new non-master drawing
- Open and edit drawing sheets
- Create drafting views and annotations
- Add views to a drawing
- Add views to a drawing
- Add dimensions to a drawing
- Add dimensions to a drawing
- Knowledge Check: Create a basic part drawing
- Thank you for Watching NX Basic Design
12 Using legacy sketch with NX 2007 31 Topics
- Building simple shapes using sketch
- (Legacy sketch) Extruding a simple sketch section
- (Legacy sketch) Creating a part using simple shapes
- (Legacy sketch) Trim curves to create a snap ring
- Create cylindrical parts using sketch
- (Legacy sketch) Define a sketch profile
- Create sketch constraints
- (Legacy sketch) Add geometric constraints to a profile
- Create sketch dimensions
- (Legacy sketch) Add dimensional constraints to a profile
- (Legacy sketch) Constrain a sketch using reference objects
- Adding details using sketch
- (Legacy sketch) Create a circular pattern of sketch curves
- (Legacy sketch) Define symmetry within a sketch
- Analyze a design
- (Legacy sketch) Alter a sketch to complete model edits
- (Legacy sketch) Resolve parent references for a sketch
- (Legacy sketch) Modify an unparameterized model using a sketch
- (Legacy sketch) Revolve a sketch profile
- (Legacy sketch) Create datums for a sketch
- (Legacy sketch) Use datums to define the angle of a boss
- (Legacy sketch) Add holes to a coupler
- (Legacy sketch) Create user defined expressions for a model
- (Legacy sketch) Extrude with offsets
- (Legacy sketch) Create a linkage arm by sweeping geometry
- (Legacy sketch) Create a linkage using a tube
- (Legacy sketch) Pattern cooling fins using external references
- (Legacy sketch) Edit features and resolve failures
- (Legacy sketch) Create a fixture assembly using top-down
- (Legacy sketch) Model a key in context of an assembly
- (Legacy sketch) Use Assembly Cut
13 Assessment: NX Basic Design - 2007 1 Topic
- Assessment: NX Basic Design
Chapters
learning path
- Learning Experience Overview
- NX User Interface - 1980
- Create a basic part - 1980
- Organize and display part models - 1980
- Create cylindrical parts using sketches - 1980
- Add Finishing Details - 1980
- Simple changes and part interrogation - 1980
- Basic part edits using synchronous - 1980
- Analyze existing assemblies - 1980
- Bottom-up assembly building - 1980
- Create a basic part drawing - 1980
- Using legacy sketch with NX 1980 - 1980
- Assessment: NX Basic Design - 1980
NX Basic Design - 1980
In this learning path, you will explore methods for developing and editing basic solid models, assembly models, and drawings.
Getting started in NX
NX Basic Design - 1980 13 Chapters
In this learning path, you will explore methods for developing and editing basic solid models, assembly models, and drawings.
1 Learning Experience Overview 2 Topics
- Welcome: Navigation Overview
- NX Basic Design Intro
2 NX User Interface - 1980 8 Topics
- NX User Interface
- Getting started in NX
- Getting started in NX
- Create a part and start to work in NX
- Create a part and start to work in NX
- Create new part files
- Open, save, and close existing part files
- Knowledge Check: NX User Interface
3 Create a basic part - 1980 9 Topics
- Building simple shapes using sketch
- Extruding simple shapes
- Creating a simple part
- Extruding a simple sketch section
- Creating a part using simple shapes
- Modify sketch curves
- Trim curves to create a snap ring
- Knowledge Check: Create a basic part
- Complete the input shaft model
4 Organize and display part models - 1980 7 Topics
- Visibility and display of objects
- Change the view display
- Change the view display
- Selection and organizing of objects
- Create a Feature Group
- Organize the cap model
- Knowledge Check: Organize and display part models
5 Create cylindrical parts using sketches - 1980 18 Topics
- Create cylindrical parts using sketches
- Define a sketch profile
- Define a sketch profile
- Create sketch relations
- Add geometric relations to a profile
- Add geometric relations to a profile
- Create sketch dimensions
- Add dimensions to a profile
- Add dimensions to a profile
- Edit sketch relations
- Sketch a bolt circle
- Revolve a sketch profile
- Using datums to define the angle of a boss
- Revolve a sketch profile
- Create datums for a sketch
- Use datums to define the angle of a boss
- Revolve and extrude using booleans
- Knowledge Check: Create cylindrical parts using sketches
6 Add Finishing Details - 1980 9 Topics
- Add Finishing details
- Add Finishing details
- Add holes to a coupler
- Blend and chamfer edges of the coupler
- Defining holes for a mount arm
- Create threads
- Knowledge Check: Add Finishing Details
- Complete the support mounting block
- Complete the milling support bracket model
7 Simple changes and part interrogation - 1980 9 Topics
- Simple changes and part interrogation
- Using the Model History
- Reorder rename and remove features
- Reorder features of an oil pan
- Identify sketch parameters and Expressions
- Measure Model Features
- Analyze the structure of an existing part
- Knowledge Check: Simple changes and part interrogation
- Simple Changes and Part Interrogation
8 Basic part edits using synchronous - 1980 6 Topics
- Basic part edits using synchronous
- Move and Replace Face
- Move faces using three points
- Resize Blends and Chamfers
- Resize blend and chamfer faces
- Knowledge Check: Basic part edits using synchronous
9 Analyze existing assemblies - 1980 7 Topics
- Introduction to Assemblies – Part 1
- Introduction to Assemblies – Part 2
- Minimally load a large assembly
- Minimal loading of a large assembly
- Open an assembly and edit assembly components
- Work in the context of an assembly
- Knowledge Check: Analyze existing assemblies
10 Bottom-up assembly building - 1980 16 Topics
- Bottom-up assembly building
- Assemble
- Define a simple assembly using Assemble
- Create an assembly using the bottom-up approach
- Create a bearing mount assembly
- Constrain an assembly
- Constrain a bearing mount assembly
- Constrain a spray pump assembly
- Part families and assemblies
- Build an assembly using part family members
- Add part family members to build a clamp
- Create a pattern of components
- Pattern shelf components
- Reference a patterned feature to pattern fasteners
- Knowledge Check: Bottom-up assembly building
- Create and constrain a new assembly
11 Create a basic part drawing - 1980 12 Topics
- Create a new drawing
- Create a new non-master drawing
- Edit the parameters of a master model
- Create a new non-master drawing
- Open and edit drawing sheets
- Create drafting views and annotations
- Add views to a drawing
- Add views to a drawing
- Add dimensions to a drawing
- Add dimensions to a drawing
- Knowledge Check: Create a basic part drawing
- Thank you for Watching NX Basic Design
12 Using legacy sketch with NX 1980 - 1980 31 Topics
- Building simple shapes using sketch
- (Legacy sketch) Extruding a simple sketch section
- (Legacy sketch) Creating a part using simple shapes
- (Legacy sketch) Trim curves to create a snap ring
- Create cylindrical parts using sketch
- (Legacy sketch) Define a sketch profile
- Create sketch constraints
- (Legacy sketch) Add geometric constraints to a profile
- Create sketch dimensions
- (Legacy sketch) Add dimensional constraints to a profile
- (Legacy sketch) Constrain a sketch using reference objects
- Adding details using sketch
- (Legacy sketch) Create a circular pattern of sketch curves
- (Legacy sketch) Define symmetry within a sketch
- Analyze a design
- (Legacy sketch) Alter a sketch to complete model edits
- (Legacy sketch) Resolve parent references for a sketch
- (Legacy sketch) Modify an unparameterized model using a sketch
- (Legacy sketch) Revolve a sketch profile
- (Legacy sketch) Create datums for a sketch
- (Legacy sketch) Use datums to define the angle of a boss
- (Legacy sketch) Add holes to a coupler
- (Legacy sketch) Create user defined expressions for a model
- (Legacy sketch) Extrude with offsets
- (Legacy sketch) Create a linkage arm by sweeping geometry
- (Legacy sketch) Create a linkage using a tube
- (Legacy sketch) Pattern cooling fins using external references
- (Legacy sketch) Edit features and resolve failures
- (Legacy sketch) Create a fixture assembly using top-down
- (Legacy sketch) Model a key in context of an assembly
- (Legacy sketch) Use Assembly Cut
13 Assessment: NX Basic Design - 1980 1 Topic
- Assessment: NX Basic Design
Chapters
learning path
- Learning Experience Overview
- NX User Interface - 1953
- Create a basic part - 1953
- Organize and display part models - 1953
- Create cylindrical parts using sketches - 1953
- Add Finishing Details - 1953
- Simple changes and part interrogation - 1953
- Basic part edits using synchronous - 1953
- Analyze existing assemblies - 1953
- Bottom-up assembly building - 1953
- Create a basic part drawing - 1953
- Using legacy sketch with NX 1953
NX Basic Design - 1953
In this learning path, you will explore methods for developing and editing basic solid models, assembly models, and drawings.
Getting started in NX
NX Basic Design - 1953 12 Chapters
In this learning path, you will explore methods for developing and editing basic solid models, assembly models, and drawings.
1 Learning Experience Overview 2 Topics
- Welcome: Navigation Overview
- NX Basic Design Intro
2 NX User Interface - 1953 8 Topics
- NX User Interface
- Getting started in NX
- Getting started in NX
- Create a part and start to work in NX
- Create a part and start to work in NX
- Create new part files
- Open, save, and close existing part files
- Knowledge Check: NX User Interface
3 Create a basic part - 1953 9 Topics
- Building simple shapes using sketch
- Extruding simple shapes
- Creating a simple part
- Extruding a simple sketch section
- Creating a part using simple shapes
- Modify sketch curves
- Trim curves to create a snap ring
- Knowledge Check: Create a basic part
- Complete the input shaft model
4 Organize and display part models - 1953 7 Topics
- Visibility and display of objects
- Change the view display
- Change the view display
- Selection and organizing of objects
- Create a Feature Group
- Organize the cap model
- Knowledge Check: Organize and display part models
5 Create cylindrical parts using sketches - 1953 19 Topics
- Create cylindrical parts using sketches
- Define a sketch profile
- Define a sketch profile
- Create sketch relations
- Add geometric relations to a profile
- Add geometric relations to a profile
- Create sketch dimensions
- Add dimensions to a profile
- Add dimensions to a profile
- Edit sketch relations
- Sketch a bolt circle
- Revolve a sketch profile
- Using datums to define the angle of a boss
- Revolve a sketch profile
- Create datums for a sketch
- Use datums to define the angle of a boss
- Revolve and extrude using booleans
- Knowledge Check: Create cylindrical parts using sketches
- Complete the milling support bracket model
6 Add Finishing Details - 1953 8 Topics
- Add Finishing details
- Add Finishing details
- Add holes to a coupler
- Blend and chamfer edges of the coupler
- Defining holes for a mount arm
- Create threads
- Knowledge Check: Add Finishing Details
- Complete the support mounting block
7 Simple changes and part interrogation - 1953 9 Topics
- Simple changes and part interrogation
- Using the Model History
- Reorder rename and remove features
- Reorder features of an oil pan
- Identify sketch parameters and Expressions
- Measure Model Features
- Analyze the structure of an existing part
- Knowledge Check: Simple changes and part interrogation
- Simple Changes and Part Interrogation
8 Basic part edits using synchronous - 1953 6 Topics
- Basic part edits using synchronous
- Move and Replace Face
- Move faces using three points
- Resize Blends and Chamfers
- Resize blend and chamfer faces
- Knowledge Check: Basic part edits using synchronous
9 Analyze existing assemblies - 1953 7 Topics
- Introduction to Assemblies – Part 1
- Introduction to Assemblies – Part 2
- Minimally load a large assembly
- Minimal loading of a large assembly
- Open an assembly and edit assembly components
- Work in the context of an assembly
- Knowledge Check: Analyze existing assemblies
10 Bottom-up assembly building - 1953 14 Topics
- Bottom-up assembly building
- Create an assembly using the bottom-up approach
- Create a bearing mount assembly
- Constrain an assembly
- Constrain a bearing mount assembly
- Constrain a spray pump assembly
- Part families and assemblies
- Build an assembly using part family members
- Add part family members to build a clamp
- Create a pattern of components
- Pattern shelf components
- Reference a patterned feature to pattern fasteners
- Knowledge Check: Bottom-up assembly building
- Create and constrain a new assembly
11 Create a basic part drawing - 1953 12 Topics
- Create a new drawing
- Create a new non-master drawing
- Edit the parameters of a master model
- Create a new non-master drawing
- Open and edit drawing sheets
- Create drafting views and annotations
- Add views to a drawing
- Add views to a drawing
- Add dimensions to a drawing
- Add dimensions to a drawing
- Knowledge Check: Create a basic part drawing
- Thank you for Watching NX Basic Design
12 Using legacy sketch with NX 1953 31 Topics
- Building simple shapes using sketch
- (Legacy sketch) Extruding a simple sketch section
- (Legacy sketch) Creating a part using simple shapes
- (Legacy sketch) Trim curves to create a snap ring
- Create cylindrical parts using sketch
- (Legacy sketch) Define a sketch profile
- Create sketch constraints
- (Legacy sketch) Add geometric constraints to a profile
- Create sketch dimensions
- (Legacy sketch) Add dimensional constraints to a profile
- (Legacy sketch) Constrain a sketch using reference objects
- Adding details using sketch
- (Legacy sketch) Create a circular pattern of sketch curves
- (Legacy sketch) Define symmetry within a sketch
- Analyze a design
- (Legacy sketch) Alter a sketch to complete model edits
- (Legacy sketch) Resolve parent references for a sketch
- (Legacy sketch) Modify an unparameterized model using a sketch
- (Legacy sketch) Revolve a sketch profile
- (Legacy sketch) Create datums for a sketch
- (Legacy sketch) Use datums to define the angle of a boss
- (Legacy sketch) Add holes to a coupler
- (Legacy sketch) Create user defined expressions for a model
- (Legacy sketch) Extrude with offsets
- (Legacy sketch) Create a linkage arm by sweeping geometry
- (Legacy sketch) Create a linkage using a tube
- (Legacy sketch) Pattern cooling fins using external references
- (Legacy sketch) Edit features and resolve failures
- (Legacy sketch) Create a fixture assembly using top-down
- (Legacy sketch) Model a key in context of an assembly
- (Legacy sketch) Use Assembly Cut
On-Demand Training - Simcenter
Receive unlimited access to all new content added during your active subscription.
During your subscription period, you will automatically receive access to all new content added to the library, including training on new product releases and technology updates to maximize your proficiency.
On-Demand Training - Simcenter
- 12 month subscription
- Access to cloud-based environment for hands-on lab exercises
- Access to new training content added during the subscription period
- Knowledge assessments to measure learning progress
Starting at
USD $2310.00 / year
USD $2310.00 / year